SBC Dump

• Arduino
• GMKtec G2
• rpi

Arduino

https://techfun.sk/produkt/arduino-uno-q-2gb-ram-lpddr4-16gb-emmc/

GMKtec G2

• To Open BIOS: [DEL]

Security Hardening

Advanced -> Network Stack Configuration -> Network PXE BOOT = [Disabled]
Security -> Setup Administrator Password

Tweaking

Boot -> Bootup NumLock State = [On]
Boot -> Quiet Boot = [Enabled]
Boot -> Fast Boot = [Enabled]
-> SATA Support = [All SATA Devices]
-> NVMe Support = [Enabled]
-> UFS Support = [Disabled]
-> VGA Support = [EFI Driver]
-> USB Support = [Full Initial]
-> PS2 Devices Support = [Disabled]
-> Network Stact Driver Support = [Disabled]

Wake on LAN

Chipset -> PCIE LAN Configuration -> Wake on LAN Enable = [Enabled]

Wake on Power (Automatic ON)

Chipset -> Wake on Power (Automatic On) = [S0 State]

Customize or Disable LED Color

Boot -> LED Colour Settings = [Disabled]

Known Issues

• Wi-Fi module is not stable on Debian.
• While having an USB-C power connector, requires special 12V/3A power supply.

rpi

https://geekworm.com/products/x1001

https://www.waveshare.com/pcie-to-eth-m.2-hat-plus.htm

sudo rpi-eeprom-update -a sudo reboot